S&B .22-250 REM. SBTGK 3,6 G

S&B .22-250 Rem. SP is a hunting cartridge loaded with a 55-grain soft-point bullet designed to deform rapidly and predictably on impact. Its high muzzle velocity, relatively flat trajectory and good weight retention make it a practical option at extended distances when the calibre and bullet meet the applicable hunting requirements.

Suitable for use

• Rifles chambered in .22-250 Remington

• Hunting where the calibre and bullet meet the applicable requirements

• Hunting appropriately sized game

• Use in open terrain

• Zeroing a hunting rifle

• Confirming the point of impact before a hunt

• Shooters requiring a fast, controlled-expansion soft-point bullet

• Firearms approved for .22-250 Remington ammunition

Why choose S&B .22-250 Rem. SP?

• Traditional soft-point bullet

• Rapid, controlled deformation on impact

• Good weight retention

• Efficient energy transfer

• Bullet weight of 3.60 g / 55 gr

• Muzzle velocity of 1,060 m/s

• Muzzle energy of 2,022 J

• G1 ballistic coefficient of 0.207

• Manufacturer-listed MRD of 198 m

• Manufacturer-listed accuracy and reliable functioning

• Factory brass case

• 20 cartridges per box

Technical specifications

• Calibre: .22-250 Remington

• Bullet type: SP / soft point

• Bullet construction: Metallic jacket with an exposed lead-core tip

• Bullet performance: Rapid, controlled expansion

• Bullet weight: 3.60 g / 55 gr

• Bullet number: 2914

• Jacket material: CuZn 10

• Sectional density: 0.157 lb/in²

• Ballistic coefficient: G1 0.207

• Ballistic coefficient: G7 0.102

• Manufacturer-listed MRD: 198 m

• Complete cartridge weight: 16.5 g

• Cartridge length: 59.60 mm

• Case: Factory brass

• +P ammunition: No

• Estimated power factor: 170.0 kgr·fps

• Test-barrel length: 600 mm

• Suggested use: Hunting

• Manufacturer-listed features: Reliable functioning, accuracy and rapid controlled expansion

Ballistic data

• Muzzle: 1,060 m/s and 2,022 J

• 100 m: 897 m/s and 1,447 J

• 200 m: 746 m/s and 1,001 J

• 300 m: 610 m/s and 670 J

• 400 m: 489 m/s and 430 J

The manufacturer’s figures were obtained with a 600 mm test barrel. Actual velocity and energy can vary according to barrel length, firearm design, ammunition lot and environmental conditions.

Trajectory reference data

Manufacturer-published points of impact with a 100-metre zero:

• 50 m: –1.2 cm

• 100 m: 0.0 cm

• 200 m: –7.4 cm

• 300 m: –32.6 cm

• 400 m: –84.7 cm

Manufacturer-published reference values using the MRD setting:

• 50 m: +0.6 cm

• 100 m: +3.6 cm

• 200 m: –0.2 cm

• 300 m: –22.0 cm

• 400 m: –70.5 cm

MRD is the manufacturer’s recommended zeroing distance at which the calculated trajectory does not rise more than 4 cm above the line of sight. The actual point of impact must always be confirmed with the individual rifle, sight and ammunition lot.

Packaging

• Cartridges per box: 20

• Boxes per case: 25

• Cartridges per case: 500

• Box dimensions: 65 × 127 × 26 mm

• Approximate box weight: 0.36 kg

Frequently asked questions

What does SP mean?

SP means Soft Point. The lead core is enclosed by a metallic jacket while the tip remains exposed, allowing the bullet to deform and transfer energy efficiently on impact.

How does the .22-250 Remington differ from the .223 Remington?

The cartridges use bullets of a similar diameter, but their cases, dimensions and ballistic performance differ. They are not interchangeable. The .22-250 Remington generally drives a bullet of the same weight at a higher muzzle velocity.

Is an SP bullet more suitable for hunting than an FMJ bullet?

An SP bullet is designed to deform and transfer energy into the target. An FMJ bullet is generally non-expanding and is usually more appropriate for training and target shooting. Hunting ammunition must be selected according to the intended quarry and applicable requirements.

What game is this cartridge suitable for?

Suitability depends on the species, shooting distance and applicable requirements concerning calibre, bullet construction and energy. Confirm that the .22-250 Remington and its 55-grain soft-point bullet meet the conditions applying to the intended quarry.

Will every rifle produce the stated muzzle velocity of 1,060 m/s?

No. The published figure was obtained with a 600 mm test barrel. A shorter barrel will generally produce a lower velocity, while chamber dimensions, temperature and ammunition lot can also affect the result.

Does an MRD of 198 m mean the rifle must always be zeroed at that distance?

No. MRD is the manufacturer’s calculated recommended zeroing distance. The best zero depends on the rifle, sight height, typical shooting distance and intended use. Actual trajectory must be confirmed at a shooting range.

Recommended products

• S&B .22-250 Rem. SBT 55 gr ammunition

• Norma .22-250 Rem. Oryx 55 gr ammunition

• Norma .22-250 Rem. Hornady V-Max 50 gr ammunition

• Norma .22-250 Rem. Vermin Extreme 55 gr ammunition

• Norma .22-250 Rem. FMJ 55 gr ammunition

• Riflescopes and suitable mounts

• Laser rangefinders

• Rifle cleaning brushes and cleaning kits

When is S&B .22-250 Rem. SP the right choice?

This load is suitable for owners of .22-250 Remington rifles who need a fast 55-grain soft-point hunting bullet. Its construction combines controlled expansion, good weight retention and efficient energy transfer.

An FMJ load may be more appropriate for regular target shooting. A bonded or rapidly fragmenting hunting bullet may be preferable depending on the intended quarry and required terminal performance.

Expert recommendation

The .22-250 Remington’s high muzzle velocity produces a relatively flat trajectory, but wind still has a noticeable effect on a light 55-grain bullet as distance increases. Confirm the point of impact at 100, 200 and, where practical, 300 metres, then prepare a ballistic reference based on results from the individual rifle.

A .22-250 barrel can heat quickly during extended firing strings. Allow the barrel to cool between groups when evaluating accuracy. Before hunting, confirm the point of impact with the same load and preferably the same production lot intended for field use.

High-velocity .22-250 Remington hunting ammunition

S&B .22-250 Rem. SP 55 gr combines a soft-point hunting bullet, 1,060 m/s muzzle velocity and controlled expansion. It is a practical load for situations where high velocity, accuracy and a relatively flat trajectory are valued.