A TOOLKIT THAT FITS IN YOUR HAND.
Made for rifles and shotguns, Gun Tool Pro’s rock-solid frame features 30 hard-working tools. Two-inch long bits fit into the magnetic 1/4” driver and 1/4” wrench for extra torque. It features two files, a locking claw-point knife and a removable magnetic storage container for holding small screws and pins. It also features a universal choke wrench and tap hammer, all in a sleek design. Gun Tool Pro sets the standard for compact gun tools.
-
Two bit drivers located at the front and on the side of the frame handle your precision adjustments and high torque jobs, respectively. Eight square-cut, hollow ground bits ride right onboard in a spring-loaded hatch: T15 Torx®, T20 Torx®, T10 Torx®, 3/32" Flat, 3/16" Flat, #2 Phillips®
-
Allen wrenches on 2.5" steel shafts allow you to reach deep into recesses to make precision adjustments on firearms, optics, and accessories.
-
Onboard and at the ready are a tap hammer for stubborn pins, fine and ultra fine metal files for deburring and polishing, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.
-
The claw-point pattern blade on a liner lock is 2.5 inches in length and scalpel sharp to handle all of your everyday cutting operations.
Overview
-
Removable magnetic storage compartment
-
Choke wrench fits 6 gauges .410 to 10
-
Two metal files
-
14 firearm-specific Torx®, Allen®, Phillips® and flat drivers/bits
-
1/4” bit driver
-
Lanyard loop
-
2.5” claw-point knife blade
-
1/4” bit wrench for extra torque
-
Tap hammer
-
Scope turret tool
-
Pin punch