FENIX PD36R PRO LED FLASHLIGHT

The Fenix PD36R Pro is a rechargeable LED torch for patrols and outdoor work where you need to switch on the light or change its brightness quickly. Both switches are located at the rear of the torch, so you can control the light without changing your grip. The Luminus SFT70 LED delivers up to 2800 lm, and the beam reaches up to 380 metres in the manufacturer's tests.

Suitable for

• Inspecting grounds, gates and fences

• Outdoor maintenance and inspection work

• Travelling on forest roads and across open terrain

• Illuminating distant waymarkers or structures

• Use as a backup light in a work vehicle or outdoor kit

Why choose the Fenix PD36R Pro?

• Two tail switches separate on/off control from brightness level selection.

• At 350 lm, the beam reaches up to 130 m and the runtime is over eight hours.

• The 30 lm Eco mode provides up to 42 hours of light on a single charge.

• The replaceable 5000 mAh battery charges directly in the torch via USB-C.

• A two-way body clip and holster provide two ways to carry the torch.

Technical specifications

• Manufacturer: Fenix

• Model: PD36R Pro

• Light source: Luminus SFT70 LED

• Eco mode: 30 lm, up to 40 m, up to 42 hours

• Low mode: 150 lm, up to 90 m, up to 19 hours

• Medium mode: 350 lm, up to 130 m, up to 8 hours and 15 minutes

• High mode: 1000 lm, up to 225 m, up to 3 hours and 55 minutes

• Turbo: 2800 lm, up to 380 m, up to 3 hours and 30 minutes

• Strobe: 2500 lm

• Battery: Fenix ARB-L21-5000 V2.0, 21700 Li-ion, 5000 mAh

• Charging: USB-C port on the torch

• Charging time: approximately 3 hours

• Controls: two tail switches

• Body: aluminium, HAIII hard-anodised finish

• Lens: toughened glass with anti-reflective coating

• Protection rating: IP68

• Drop test: 1 m according to the manufacturer's manual

• Dimensions: 145.8 × 26.5 × 25.7 mm

• Weight: 169 g including battery

The total Turbo runtime includes operation at automatically reduced light output.

In the box

• Fenix PD36R Pro torch with body clip

• Fenix ARB-L21-5000 V2.0 battery

• USB-C charging cable

• Holster

• Wrist strap and spare seal

• User manual and warranty card

Frequently asked questions

How do the two tail switches on the Fenix PD36R Pro work?

Half-pressing the main switch provides light while it is held down. A full press switches on the light continuously. When the torch is on, the second tail switch lets you change the brightness level and select strobe mode.

How long does it take to charge the PD36R Pro's 5000 mAh battery?

Fully charging an empty battery through the torch's USB-C port takes approximately three hours. A green charging indicator shows when the battery is full.

Which spare battery is suitable for the Fenix PD36R Pro torch?

Fenix recommends the included ARB-L21-5000 V2.0 battery. The manufacturer also confirms compatibility with the ARB-L21-5000U and ARB-L21-4000P models.

When is the Fenix PD36R Pro the right choice?

The PD36R Pro is suitable if you want to control both switching and brightness level selection from the rear of the torch and need up to 2800 lm for short periods. If you often use a torch for long periods at a very low setting, consider the Fenix PD36R V2.0, whose 5 lm Eco mode runs for up to 482 hours.

Our recommendation

Before your first patrol in the dark, try both tail switches while wearing gloves. Practise the half-press if you want to illuminate a waymarker or a door lock for just a few seconds. For continuous light, start at the 150 or 350 lm setting. Save the higher setting for inspecting distant objects. This helps the battery last longer and reduces the light reflected back from nearby bright surfaces.

If you need the torch repeatedly during a patrol, always carry it in the same position in its holster. This makes it easy to find the tail switches by touch, even in the dark. Before a long working day, check the battery charge and close the USB-C port cover after charging. Before putting the torch in a tightly packed bag, loosen the body slightly according to the manual to prevent accidental activation. Tighten the body again before use.

Two tail switches for quick light control

The Fenix PD36R Pro provides light for a patrol lasting several hours as well as for a quick inspection of a distant object. Choose this model if you prefer to control all the main functions from the rear of the torch.