BIRCHWOOD CASEY BARRICADE RUST PROTECTION 283 G

Birchwood Casey Barricade is a moisture-displacing rust-protection aerosol for firearm metal surfaces. It drives moisture from the pores of the metal and leaves a transparent protective coating that seals the surface. The formula is particularly useful for firearms exposed to high humidity or salt-air conditions.

Suitable for use

• Protecting external firearm metal surfaces

• Maintaining bores and other internal metal components

• Protecting a firearm after wet-weather use

• Displacing moisture from metal surfaces

• Seasonal and extended firearm storage

• High-humidity environments

• Coastal and salt-air conditions

• Loosening lightly rusted or frozen components

• General firearm cleaning and lubrication

• Hunters, sport shooters and firearm collectors

Why choose Birchwood Casey Barricade?

• Drives moisture from the pores of metal

• Leaves a transparent rust-preventative coating

• Suitable for all firearm metal surfaces

• Particularly useful in humid and salt-air climates

• Withstood 500 hours in the manufacturer’s ASTM humidity test

• Withstood 96 hours in the manufacturer’s ASTM salt-spray test

• Acts as a penetrant for rusty or frozen components

• Provides lubricating properties

• Can be used as a bore cleaner

• Aerosol application provides even coverage

• Suitable for routine care and storage preparation

Technical specifications

• Product type: Moisture-displacing rust preventative

• Intended use: Corrosion protection for firearm metal surfaces

• Net contents: 283 g

• Manufacturer-stated volume: 10 fluid ounces / approximately 296 ml

• Container: Aerosol

• Application: Spray

• Primary compatibility: Firearm metal surfaces

• Primary action: Moisture displacement and rust prevention

• Protective coating: Transparent

• Additional function: Lubrication

• Penetrating action: Suitable for loosening rusty or frozen components

• Bore cleaning: Yes

• ASTM humidity-test result: 500 hours

• ASTM salt-spray-test result: 96 hours

• Hazard classification: Flammable aerosol

• Container type: Pressurized aerosol can

• Storage: Cool, well-ventilated location protected from sunlight

• Maximum storage temperature: Below +50 °C

Supplied with

• Birchwood Casey Barricade rust-protection aerosol, 283 g

Frequently asked questions

How should Birchwood Casey Barricade be applied?

Remove loose dirt and contamination from the metal surface. Apply the product sparingly and spread it into a thin, even film with a clean cloth or patch. The aerosol displaces remaining moisture and leaves a transparent protective coating on the metal.

What do the 500-hour and 96-hour test results mean?

These are manufacturer-reported laboratory results: 500 hours in a controlled ASTM humidity test and 96 hours in an ASTM salt-spray test. Actual protection time depends on surface preparation, coating thickness, handling, storage conditions and environmental exposure. The results are not a guaranteed duration in normal use.

Can Barricade be used inside a firearm bore?

Yes. The manufacturer also describes Barricade as an effective bore cleaner and protectant. For storage, apply it in a controlled manner with a suitable cleaning patch. Before firing, wipe the bore and chamber dry and confirm that the bore is completely unobstructed.

Does Barricade replace firearm oil?

Barricade has lubricating properties, but high-load sliding and contact surfaces may require the specific oil or grease recommended by the firearm manufacturer. Its primary purpose is moisture displacement and corrosion protection.

Can it help with an already rusted component?

Barricade acts as a penetrant and may help loosen lightly rusted or frozen components. It cannot restore deeply corroded metal. Severe corrosion or a damaged firearm component should be inspected by a qualified gunsmith.

Can the product be used on wood, plastic or rubber?

The product is intended primarily for metal surfaces. Avoid spraying optics, wood, polymers, rubber and other sensitive materials. If contact cannot be avoided, test compatibility on a small concealed area and follow the instructions on the container.

How much product should be applied?

A thin, even protective film is normally sufficient. Excess product can attract dust, migrate into the action or reach the chamber and ammunition. Remove visible excess with a clean cloth.

How should the aerosol be used safely?

Use it outdoors or in a well-ventilated area and wear suitable eye protection and protective gloves. Keep the aerosol away from heat, sparks, open flames and other ignition sources. Do not pierce or burn the pressurized container.

Recommended products

• Birchwood Casey Barricade rust-protection wipes

• Birchwood Casey Gun Scrubber 37 ml

• Birchwood Casey Gun Scrubber 296 ml

• Birchwood Casey Gun Scrubber and Gun Oil compact combo

• Synthetic firearm oil

• Calibre-appropriate cleaning brushes and patches

• Firearm maintenance mat

• Bore-cleaning solvent

When is Birchwood Casey Barricade the right choice?

Barricade is well suited to firearms exposed to rain, condensation, high humidity or salt air. Its moisture-displacing formula and transparent protective film make it useful during the hunting season and when preparing a firearm for extended storage.

Choose an oil or grease specified in the firearm manual when the main requirement is lubrication of moving components. Heavy copper, lead or powder fouling requires a dedicated bore cleaner. Barricade is most useful as the final maintenance step after the metal surfaces have been cleaned and need protection from moisture and rust.

Expert recommendation

Before maintenance, remove the magazine, inspect the chamber visually and physically, and keep ammunition away from the work area. Remove major contamination and dry the metal surfaces. Spray Barricade onto a cloth rather than directly onto the firearm whenever practical, as this makes it easier to control the amount and protect optics, wood and polymer components.

For extended storage, apply a thin film to external metal surfaces and use a cleaning patch to treat the bore. Before the firearm is used again, wipe the bore and chamber dry, remove excess protectant and confirm that the bore is unobstructed. Inspect stored firearms periodically because the required maintenance interval depends on temperature and humidity.

Effective protection against moisture and rust

Birchwood Casey Barricade displaces moisture from metal and leaves a transparent corrosion-resistant coating. The aerosol is suitable for routine firearm maintenance, use after exposure to wet conditions and preparation for extended storage.