REAL AVID SMART-TORQ

The Real Avid Smart-Torq is an adjustable torque screwdriver designed for firearms and optic mounts, with a range of 1.1–7.9 Nm or 10–70 in-lb. With 1 in-lb adjustment increments, a click clutch, and Force Assist auxiliary handle, it helps you secure scope rings, bases, stocks, and accessories with the torque specified by the manufacturer.

Suitable for use in

• Mounting optic bases

• Tightening scope rings

• Installing red dot sights

• Tightening stock and receiver screws

• Installing firearm accessories

• Securing Picatinny and Weaver accessories

• Following manufacturer torque specifications

• Protecting aluminum scope tubes from over-torque

• Improving repeatability when assembling firearms

• For the home gun maintainer

• For the gunsmith’s workbench

• For shooters who swap or adjust optics

Why choose the Real Avid Smart-Torq?

• Adjustable range 1.1–7.9 Nm

• Imperial range 10–70 in-lb

• Precise 1 in-lb adjustment steps

• Audible and tactile feedback

• Unidirectional clutch for controlled tightening

• Ergonomic rubberized handle

• Freely rotating handle end

• Force Assist auxiliary handle

• Easy-to-read torque scale

• Includes 11 bits suitable for optic mounts

• 1/4" square adapter included

• Compact padded storage case

• Compatible with many scope rings and base fasteners

• Helps reduce risk of over-tightening

Technical specifications

• Manufacturer: Real Avid

• Model: Smart-Torq

• Product type: adjustable torque screwdriver

• Torque range: approximately 1.1–7.9 Nm

• Torque range in inch-pounds: 10–70 in-lb

• Adjustment increment: approximately 0.11 Nm or 1 in-lb

• Torque feedback: audible and tactile click

• Clutch: unidirectional toothed clutch

• Handle: ergonomic and rubberized

• Auxiliary handle: Force Assist

• Number of included bits: 11

• Torx bits: T10, T15, T20, and T25

• Hex bits: 3 mm, 5/32", 3/16", and 7/64"

• Flat bits: 90-6, 38-4, and 60-5

• Adapter: 1/4" hex-to-square adapter

• Sockets: not included

• Storage: padded storage case

• Main application: optic mounts, stocks, and firearm accessories

Set includes

• Real Avid Smart-Torq torque screwdriver

• Force Assist auxiliary handle

• 11 screwdriver bits

• 1/4" square adapter

• Padded storage case

Frequently Asked Questions

What is the torque range of the Smart-Torq?

The range is 10–70 in-lb, or approximately 1.1–7.9 Nm. The setting can be adjusted in 1 in-lb increments.

When does the torque screwdriver click?

When the torque applied to the screw reaches the selected value, the clutch provides an audible and tactile signal. After the click, do not continue tightening the screw.

Can screws be loosened with the Smart-Torq?

The tool allows turning in the opposite direction, but for releasing stuck screws, it is recommended to use a regular screwdriver. The main purpose of the Smart-Torq is controlled final tightening.

Are all scope rings tightened to the same torque?

No. The correct value depends on the rings, base, screw, and optic design. Always use the value specified by the specific manufacturer.

Are sockets included in the set?

The set includes a 1/4" square adapter, but sockets are not included. Select a suitable socket separately if needed.

When is the Real Avid Smart-Torq the right choice?

Smart-Torq is the best choice for users who already have suitable tools for removing screws but need controlled torque for final installation of optics and firearm accessories. The compact kit is also a great addition to the range bag.

If you need a very wide range of bits and an illuminated screwdriver in addition to a torque tool, choose the Smart-Torq & Driver Master Set. For specific fixed-torque jobs, a set of fixed torque limiters may be suitable.

Recommendations

We recommend first turning screws lightly with a regular screwdriver until they are flush, and using the Smart-Torq only for final tightening. Tighten scope ring screws alternately and in small increments to keep gaps as even as possible and avoid uneven pressure on the scope tube.

Ensure the selected bit fits the screw head precisely. Keep the tool aligned with the screw axis and use the Force Assist handle to improve control, not to exceed the allowed torque. Stop tightening after the first click.

Store the torque screwdriver clean, in a dry place, and at the lowest setting as per the manual. If the tool is dropped, receives a strong impact, or the readings become questionable, have the calibration checked before the next sensitive installation.

Controlled torque for optics and firearm accessories

The Real Avid Smart-Torq AVSTORQ helps you secure scope bases, rings, stocks, and firearm accessories precisely to the manufacturer’s specified torque. The adjustable 1.1–7.9 Nm range and 11 included bits cover most common optic mounting needs.